Digi LR54 User Manual page 519

Virtual Private Networks (VPN)
c. Select the Test type:
n
n
n
n
n
n
14. Click Apply to save the configuration and apply the change.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
LR54 User Guide
Test another interface's status: Allows you to test another interface's status, to
create a failover or coupled relationship between interfaces. If Test another
interface's status is selected:
For Test Interface, select the alternate interface to be tested.
l
For IP version, select the alternate interface's IP version. This allows you to
l
determine the alternate interface's status for a particular IP version.
For Expected status, select whether the expected status of the alternate
l
interface is Up or Down. For example, if Expected status is set to Down, but
the alternate interface is determined to be up, then this test will fail.
Ping test: Tests connectivity by sending an ICMP echo request to the hostname or
IP address specified in Ping host. You can also optionally change the number of
bytes in the Ping payload size.
DNS test: Tests connectivity by sending a DNS query to the specified DNS server.
HTTP test: Tests connectivity by sending an HTTP or HTTPS GET request to the
URL specified in Web servers. The URL should take the format of http
[s]://hostname/[path].
Test DNS servers configured for this interface: Tests connectivity by sending a
DNS query to the DNS servers configured for this interface.
Test the interface status: The interface is considered to be down based on:
Down time: The amount of time that the interface can be down before this test
l
is considered to have failed.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and
take the format number{w|d|h|m|s}.
For example, to set Down time to ten minutes, enter 10m or 600s.
The default is 60 seconds.
Initial connection time: The amount of time to wait for an initial connection to
l
the interface before this test is considered to have failed.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and
take the format number{w|d|h|m|s}.
For example, to set Initial connection time to ten minutes, enter 10m or 600s.
The default is 60 seconds.
OpenVPN
519