Table of Contents
Advertisement
Applications
WebUI
1. Log into the IX20 WebUI as a user with Admin access.
2. At the Status page, click Scripts.
The Scripts page displays:
Command line
1. Log into the IX20 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
show scripts
> show scripts
Index
-----
0
1
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Run a Python application at the shell prompt
Python applications can be run from a file at the shell prompt. The Python application will run until it
completes, displaying output and prompting for additional user input if needed. To interrupt the
application, enter CTRL-C.
Note
Python applications cannot be run from the Admin CLI. You must access the device shell in order
to run Python applications from the command line. See
configuring authentication groups that include shell access.
1. Upload the Python application to the IX20 device:
WebUI
IX20 User Guide
command at the system prompt:
Label
Enabled
-----------
-------
script1
true
script2
true
Run a Python application at the shell prompt
Status
Run time
------
--------
active
idle
01:00
Authentication groups
for information about
536
Advertisement
Table of Contents
