Serial port
on the device.
a. Open browser window.
b. Enter the IP address in the URL address bar to access the web interface.
c. Choose Network > Network Services Settings.
d. Select the Enable Encrypted RealPort option and verify that the port number is 1027.
e. Click Apply.
9. Click OK.
10. Click Apply.
Configure the serial port for RealPort mode
RealPort mode allows you to use Realport.
To change the configuration to match the serial configuration of the device to which you want to
connect:
Web
1. Log into the IX10 WebUI as a user with Admin access.
2. On the menu, click System. Under Configuration, click Serial Configuration.
The Serial Configuration page is displayed.
Note
You can also configure the serial port by using Device Configuration > Serial. Changes
made by using either Device Configuration or Serial Configuration will be reflected in both.
3. Click the name of the port that you want to configure.
The serial port is enabled by default. To disable, toggle off Enable.
4. For Mode, select RealPort.
5. Leave Sharing Mode at the default, None.
IX10 User Guide
Configure RealPort mode
182