System Configuration Commands - Pacific Power Source AFX Series Operation Manual

8.9.4

System Configuration Commands

Query Format
Description
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
SYSTem:MAXKVA?
Returns maximum available kVA output capability of the power
source. Example for 3150AFX model = 15.0000
<nr2>
SYST:MAXKVA?
15.000
SYSTem:MAXCURRent?
Returns maximum available RMS or DC output current capability of
the power source. Example for 3150AFX model = 41.6667.
<nr2>
SYST:MAXCURR?
41.6667
SYSTem:MAXVOLTage?
Returns maximum available RMS or DC voltage output capability of
the power source. Example for 3150AFX model = 300.
<nr1>
SYST:MAXVOLT?
300
SYSTem:COMPatible
Sets Pacific Power Source UPC controller compatibility mode. This
mode allows use of the power source with legacy software.
< 0 | DISABLE | 1 | UPC >
SYST:COMP UPC
SYSTem:COMPatible?
<b>
SYST:COMP?
1
SYSTem:HWREVision?
Returns the hardware revision letter of the power source
<cr>
SYST:HWREV?
A
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 346 of 485