Cabinet System Options; Ocs: Output Control Switch Option; Table 5-2: Available Afx Cabinet Options; Figure 5-21Afx "Ag" Version Cabinet -Ocs Option Wiring Diagram - Pacific Power Source AFX Series Operation Manual

5.17 Cabinet System Options

The following cabinet options are available.
Option
-OCS
-EPO
-MRC
-27UX1
-27UX2
Following sections cover operation or use of these available options. If your cabinet was not
furnished with these options, you skip to Section 5.18, "Interface Options".

5.17.1 -OCS: Output Control Switch Option

The output control switch option adds an output control selector switch
on a 1U filler panel located directly below the master AFX unit of the
cabinet. It also provides a terminal block located in the rear of the AFX
cabinet that allows the user to wire in one or more series SPST switches
as part of a text fixture safety interlock. Opening the front panel mounted
switch will disable the output of the power source. The ON and OFF
position of the OCS switch is silkscreened on the panel.
5.17.1.1 OCS Switch wiring for "A" Versions

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
Description
Output Control Switch
Emergency Power Off
Mode Relay Control
Expandable 3300AFX cabinet, prepped for one
additional aux unit
Expandable 3300AFX cabinet, prepped for two
additional aux units

Table 5-2: Available AFX Cabinet Options

AFX MASTER DB25
13
CONNECTOR
Pin 6
Pin 15
14
1

Figure 5-21AFX "AG" Version Cabinet -OCS Option Wiring Diagram

SECTION 5: UNPACKING AND INSTALLATION
TERMINAL
STRIP
AFX SERIES® OPERATION MANUAL
Available on
All AFX cabinets
3180AFX, 3240AFX
& 3300AFX
OFF POSITION
Panel Mounted
OCS Switch
Page 83 of 485