Aux I/O Calibration Commands - Pacific Power Source AFX Series Operation Manual

8.10.4 AUX I/O Calibration Commands

SYSTem:AIO
:INPut#
:CALibration
:OUTput#
:CALibration
8.10.4.1 SYSTem:AIO:INPUT#:CALibration
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Command
Returned Data Format <nr2>
Query Example
Query Command
Returned Data Format <nr2>
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
:GAIN{?]
:DEFault[?]
:MAXimum
:MINinimum
:OFFset{?]
:DEFault[?]
:MAXimum
:MINinimum
:GAIN{?]
:DEFault[?]
:MAXimum
:MINinimum
:OFFset{?]
:DEFault[?]
:MAXimum
:MINinimum
SYSTem:AIO:INput[n]:CALibration:GAIN <nr2>
Calibrates the full scale gain of the AFX parameter controlled
by the analog input.
Reference
<nr2>
SYST:AIO:IN1:CAL:GAIN 100.0
SYSTem:AIO:INput[n]:CALibration:GAIN?
Returns calibration coefficient
<nr2>
SYST:AIO:IN1:CAL:GAIN?
1.000
SYSTem:AIO:INput[n]:CALibration:GAIN:DEFault?
Returns default calibration coefficient value
SYST:AIO:IN1:CAL:GAIN:DEF?
1.000
SYSTem:AIO:INput[n]:CALibration:GAIN:MAXimum?
Returns upper limit of calibration coefficient value
SYST:AIO:IN1:CAL:GAIN:MAX?
1.000
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 381 of 485