Command Syntax
Description
Parameters
Parameter Format
Example
8.3.2
UPC Mode Specific commands.
Following commands are included for UPC compatibility mode only and don't perform any function
other than providing query responses for use with legacy software programs.
Query Format
Query Format
Command Syntax
Query Format
8.3.3
AUX I/O Interface Calibration Commands
For a list of AUX I/O calibration commands, see Section 8.10.4, "
381.
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
CALibrate:UPDATE
Transfers cal factors from XML Calibration file to NVM. Required only
if calibration.xml has been modified. Alternatively, the unit can be
power cycled.
None
n/a
n/a
CALibrate:VALue:XFMRRATIO?
CALibrate:VALue:AMPLIFIERS?
CALibrate:KFACTORS <k_int_Va, k_int_Vb, k_int_Vc,
k_ext_Va, k_ext_Vb, k_ext_Vc,
k_Ia, k_Ib, k_Ic, k_oscA, k_oscB,
k_oscC>
CALibrate:KFACTors:ALL?
AUX I/O Calibration Command
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
" on page
Page 219 of 485