Pacific Power Source AFX Series Operation Manual page 241

Command Syntax
Description
Parameters
Steady State list
Optional Transient Segment
Parameter Format
Example
Query Format
Description
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
PROGram[:SELected]:DEFine [<nr1>,] [<cr>,] <cr>
This command programs all values stored in the selected program
number. Both steady-state and transient segment parameter names
and values may be sent. Program parameters are defined in the
following sections.
NOTE: Only commas may separate the values, NO Carriage Returns or
Line Feeds may separate the values within a single command message.
Option: PROGRAM, NUMBER [,<cr>} or [,<nr1>]
Option: MEMORY [,<cr>] – Available are: INTERNAL | RAM | USB
Parameter list define string <cr>,<cr>,....,<cr>
FORM,<n>,
COUPLing,<s>,
XFMRRATIO,<n.nn>,
FREQuency,<n>,
VOLTage,<n>,
VOLTage1,<n>,
VOLTage2,<n>,
VOLTage3,<n>,
CURRent:LIMit,<n>,
CURRent:PROTect:LEVel,<n>
CURRent:PROTect:TOUT,<n>
PHASe2,<n>,
PHASe3,<n>,
WAVEFORM,<n>,
WAVEFORM1,<n>,
WAVEFORM2,<n>,
WAVEFORM3,<n>,
EVENTS,<n>,
AUTORMS,<n>
NSEGS, <n>
SEGment,<n>,
list
FSEG,<n>,
VSEG,<n>,
VSEG1,<n>,
VSEG2,<n>,
VSEG3,<n>,
WFSEG,<n>
WFSEG1,<n>,
WFSEG2,<n>,
WFSEG3,<n>,
TSEG,<n>,
LAST
<cr>,<cr>,....,<cr>,<cr>
PROGram[:SELected]:DEFine? [<nr1>,] [<cr>,]
The Query format returns steady-state values of selected program and
segment values of most recently selected segment or multiple
segments if specified by a previous NSEGS parameter. "LAST" is
returned with segment data if the segment is the last segment in the
program.
Refer to parameter lists shown above
PROG:DEF? 6
<nr1>, <cr>,....,<cr>
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
see Convention #13.
see Convention #13.
Multiple segments per Program Message may
be sent, see Convention 17
see Convention #13.
see Convention #13.
Time based in secs if n > 0
Cycle based in no. of cycles if n < 0
Sent only if this is the LAST segment.
Page 241 of 485