Dc Power Supply; Rs232 Description - Pacific Power Source AFX Series Operation Manual

7.3.11 12 DC Power Supply

A pin in the DB25 port provides a current limited, regulated 12V supply. The maximum
current capability is 0.5Adc.
There are no menus or commands associated with this output, as it is always active.

7.3.12 RS232 Description

The Tx and Rx signal on the AUX I/O connector may be used to connect to a serial port. Only
Xon/Xoff handshake mode is supported on this RS232 port. For most situations, it is
recommended to use the USB Device port for remote serial control applications.

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
AFX SERIES® OPERATION MANUAL
Rear Panel, Connectors and Protection
SECTION 7:
Page 205 of 485