Pacific Power Source AFX Series Operation Manual page 289

Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Syntax
Description
Query Example
Query Syntax
Description
Query Example
Query Syntax
Description
Query Example
Query Syntax
Description
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
[SOURce:]PROTect[:RMS]:CURRent:TDELAY <DELAY>
This command sets the rms current protection trip delay in 100
msecs increments, i.e. as setting of 5 means 500 msec.
< DELAY >
<nr1>
PROTect:CURR:TDELAY 5
[SOURce:]PROTect[:RMS]:CURRent:TDELAY?
<nr1>
PROT:CURR:LEV?
5
[SOURce:]PROTect[:RMS]:CURRent:TDELAY:MINimum?
This command returns the minimum rms current protection trip
delay setting.
PROT:CURR:TDELAY:MIN?
0
[SOURce:]PROTect[:RMS]:CURRent:TDELAY:MAXimum?
This command returns the maximum rms current protection trip
delay setting.
PROT:CURR:TDELAY:MAX?
3000
[SOURce:]PROTect[:RMS]:CURRent:TDELAY:DEFault?
This command returns the default rms current protection trip delay
setting.
[SOURce:]PROTect[:RMS]:CURRent:TDELAY:DEFault?
41.667
[SOURce:]PROTect[:RMS]:CURRent:TRIPped?
This command returns rms current protection trip status. Returns 1 if
tripped or 0 if not.
PROT:CURR:TRIP?
41.667
[SOURce:]PROTect[:RMS]:CURRent:TRIPped:CLEar
This command clears the rms current protection trip status. Once
cleared, the power source output can be enabled.
None
n/a
PROT:CURR:TRIP:CLE
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 289 of 485