Pacific Power Source AFX Series Operation Manual page 259

Query Format
Description
Parameters
Parameter Format
Returned Data Format
Query Example
Query Format
Description
Parameters
Parameter Format
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
PROGram:CRC? <cr>
This query command calculates and returns the checksum value of
the selected program. This CRC may be used to verify the program
data integrity is intact. This command is provided for UPC
compatibility mode and not recommended for new programs.
Optional: Memory type: INTERNAL | RAM | USB
<cr>
<nr1>
PROG:CRC? RAM
08ad55
PROGram:BROWse?
This command returns the list of available programs stored in the
memory selected or passed as a parameter.
Optional: Memory type: INTERNAL | RAM | USB
<cr>
<nr1>, <nr1>,....,<nr1>
PROG:BROW?
1,8,9,23
PROGram:WFBANK?
This query command returns the waveform bank number. It is
provided for UPC compatibility mode and not recommended for new
programs. It always returns a minus one (-1) response.
-1
PROG:WFBANK?
-1
PROGram:WFCRC?
This query command calculates and returns the checksum value of all
waveforms. The CRC may be used to verify the waveform data
integrity is intact. This command is provided for UPC compatibility
mode and not recommended for new programs.
<nr1>
PROG:WFCRC?
-31893,18622,25404,-20201,15032,-2662,-28577,-5178,-3736,-
23017,-19989,-25093,-2813,3096,-32131,4403
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 259 of 485