Transformer Output Voltage Range (T Option); Available T Option Rating Versions; Figure 4-13: Rack Mount Chassis For 6Kva To 15Kva Transformer Option - Pacific Power Source AFX Series Operation Manual

4.15 Transformer Output Voltage Range (T Option)

If more than 332Vac L-N is required in three-phase mode, the 400V Transformer option may
be added to an AFX power source. This option provides an additional 400Vac L-N AC only
voltage range. The standard 300Vac L-N voltage range as well as the DC mode and AC+DC
modes remain available as the output transformer for this option are bypassed when not in
use.

Figure 4-13: Rack Mount Chassis for 6kVA to 15kVA Transformer Option

4.15.1 Available T Option Rating Versions

The Transformer option is available in several power levels to match the AFX source
configuration. The following transformer option ratings are available. Note that AFX models
used with a Transformer option are designated by an "AFXT" series designation.
AFXT Models
360AFXT-2AG/-4AG
390AFXT-2AG/-4AG
3120AFXT-2AG/-4AG
3150AFXT-2AG/-4AG
3180AFXT-2AG/-4AG
3240AFXT-2AG/-4AG
3300AFXT-2AG/-4AG
3450AFXT-2AG/-4AG
3600AFXT-2AG/-4AG

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
Transformer Rating
Rack Mount 19" Chassis, 4U (7") height.
Rated for 15kVA max. ,0 -400Vac
Transformers are installed in 19" Cabinet Systems along with AFX power sources
Rated to 30kVA max ,0 -400Vac
Transformers are installed in 19" Cabinet Systems along with AFX power sources
Rated to 45kVA max, 0 -400Vac
Transformers are installed in 19" Cabinet Systems along with AFX power sources
Rated to 60kVA max, 0 -400Vac
For higher power configurations, contact factory
AFX SERIES® OPERATION MANUAL
SECTION 4: TECHNICAL SPECIFICATIONS
/ 0 – 692Vac
LN
/ 0 – 692Vac
LN LL
/ 0 – 692Vac
LN LL
/ 0 – 692Vac
LN LL
LL
Page 45 of 485