Pacific Power Source AFX Series Operation Manual page 341

Query Format
Description
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
SYSTem:TIME:SOURce?
Queries source of date and time information.
<cr>
SYST:TIME:SOUR?
NTP
Note: NTP stands for "Network Time Protocol". A protocol built on
top of TCP/IP that assures accurate local timekeeping with reference
to radio, atomic or other clocks located on the Internet. This protocol
is capable of synchronizing distributed clocks within milliseconds over
long time periods. It is defined in STD 12, RFC 1119 (RFC = Request
for comment. RFCs are used by the Internet Engineering Task Force
(IETF) and other standards bodies.
SYSTem:VERSion?
Returns SCPI standard revision version.
<nr2>
SYST:VERS?
1992.0
SYSTem:XFMRRATIO?
Returns the transformer option (T Option) voltage ratio.
If no transformer option is installed and configured, this query will
return a value of 0.000. See also the [SOURce:]COUPLing command.
<nr2>
SYSTem:XFMRRATIO?
1.3333
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 341 of 485