The requisite DELTA load output wiring is shown in Figure 5-10 using internal voltage sense
and Figure 5-11 when using external voltage sense.
Note
Load and sense wiring are NOT included with the power source and must be
supplied by the end-user.
NOTE: THREE NEUTRAL
OUTPUT CONNECTOR PINS
(N N N) ARE INTERNALLY
SHORTED TOGETHER.
NO NEUTRAL
CONNECTION TO DELTA
LOADS.
USE PROVIDED MATING CONNECTOR
TO CONNECT LOAD WIRES
Figure 5-10: Three phase Delta Load Output Connections – Internal Voltage Sense
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
AFX SERIES® OPERATION MANUAL
SECTION 5: UNPACKING AND INSTALLATION
Vab
L1 (A)
Vbc
L2 (B)
Vac
L3 (C)
Page 66 of 485