Pacific Power Source AFX Series Operation Manual page 313

Programmable power source
Hide thumbs Also See for AFX Series:
Table of Contents

Advertisement

Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
[SOURce:]STEP:FREQuency[:INITial] <nr2 >, <cr>
This command sets the initial STEP frequency.
Frequency, < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
<nr2>, <cr>
STEP:FREQ 50.0, SAT
[SOURce:]STEP:FREQuency[:INITial]?
<nr2>
STEP:FREQ?
50.0000
[SOURce:]STEP:FREQuency[:INITial]:MINimum?
This command returns the minimum permissible set value for the
initial STEP frequency.
<nr2>
STEP:FREQ:MIN?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
[SOURce:]STEP:FREQuency[:INITial]:MAXimum?
This command returns the maximum permissible set value for the
initial STEP frequency.
<nr2>
STEP:FREQ:MAX?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
[SOURce:]STEP:FREQuency[:INITial]:DEFault?
This command returns the default set value for the initial STEP
frequency.
<nr2>
STEP:FREQ:DEF?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
[SOURce:]STEP:FREQuency:FINal <nr2 >, <cr>
This command sets the final STEP frequency.
Frequency, < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
<nr2>, <cr>
STEP:FREQ:FIN 55.0, SAT
[SOURce:]STEP:FREQuency:FINal?
<nr2>
STEP:FREQ:FIN?
55.0000
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 313 of 485

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents