Pacific Power Source AFX Series Operation Manual page 383

Query Command
Returned Data Format <nr2>
Query Example
8.10.4.2 SYSTem:AIO:OUTput#:CALibration
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Command
Returned Data Format <nr2>
Query Example
Query Command
Returned Data
Format
Query Example
Query Command
Returned Data
Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
SYSTem:AIO:INput[n]:CALibration:OFFset:MINimum?
Returns lower limit of calibration coefficient value
SYST:AIO:IN1:CAL:OFF:MIN?
1.000
SYSTem:AIO:OUTput[n]:CALibration:GAIN <nr2>
Calibrates the full scale gain of the AFX parameter controlled by
the analog output.
Reference
<nr2>
SYST:AIO:OUT1:CAL:GAIN 100.0
SYSTem:AIO:OUTput[n]:CALibration:GAIN?
Returns calibration coefficient
<nr2>
SYST:AIO:OUT1:CAL:GAIN?
1.000
SYSTem:AIO:OUTput[n]:CALibration:GAIN:DEFault?
Returns default calibration coefficient value
SYST:AIO:OUT1:CAL:GAIN:DEF?
1.000
SYSTem:AIO:OUTput[n]:CALibration:GAIN:MAXimum?
Returns upper limit of calibration coefficient value
<nr2>
SYST:AIO:OUT1:CAL:GAIN:MAX?
1.000
SYSTem:AIO:OUTput[n]:CALibration:GAIN:MINimum?
Returns lower limit of calibration coefficient value
<nr2>
SYST:AIO:OUT1:CAL:GAIN:MIN?
0.000
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 383 of 485