Pacific Power Source AFX Series Operation Manual page 389

7 SOS
6 MSS/RQS
5 ESB
4 MAV
3 SQS
2 EEQ
1 BUSY
0 FAULT
Note: Setting a SERVICE REQUEST ENABLE (SRE) bit true unmasks the STATUS bit in the
STB. Bit 6 of the SRE is not applicable as the MASTER SUMMARY bit of the STB
cannot be masked. The STB, SRE, ESR and ESE registers are 8 bits each.

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
:STATus:OPERation register bit summary
- MASTER SUMMARY
summarizes all STATUS BYTE bits (except bit 6) for *STB?, or,
- REQUEST SERVICE
indicates this device requested service when a Serial Poll was
performed.
STANDARD EVENT STATUS REGISTER bit summary
MESSAGE AVAILABLE indicates Query response data is available
:STATus:QUEStionable register bit summary
ERROR/EVENT QUEUE indicates an SCPI Error/Event message is available
indicates UPC front panel not in V/I mode
indicates Power Source FAULT
Table 8-4: Status Byte Register (STB)
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 389 of 485