Pacific Power Source AFX Series Operation Manual page 245

Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Format
Description
Parameters
Query Example
Query Format
Description
Parameters
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
PROGram:EXECuted:DEFine <cr>
This command programs all values stored in the selected program
number. Both steady-state and transient segment parameter names
and values may be sent. Program parameters are defined in the
following sections.
NOTE: Only commas may separate the values, NO Carriage Returns or
Line Feeds may separate the values within a single command
message.
Refer to PROGram:SELected:DEFine command
<cr>,<cr>,....,<cr>,<cr>
PROGram:EXECuted:DEFine?
<cr>,<cr>,....,<cr>,<cr>
PROG:EXEC:DEF?
-> parameter list
PROGram[:SELected]:DEFine:ALL?
This query returns the parameter list for the selected program
number or name.
Option: PROGRAM, NUMBER [,<cr>} or [,<nr1>]
Option: MEMORY [,<cr>]– Available are: INTERNAL | RAM | USB
Parameter list define string <cr>,<cr>,....,<cr>
PROG:DEF:ALL?
-> parameter list
PROGram:EXECuted:DEFine:ALL?
This query returns the parameter list for the executing program
number or name.
Option: PROGRAM, NUMBER [,<cr>} or [,<nr1>]
Option: MEMORY [,<cr>]
Parameter list define string <cr>,<cr>,....,<cr>
PROG:EXEC:DEF:ALL? 3
-> parameter list
PROGram[:SELected]:INFOrmation <cr> [,<nr1>] [,<cr>]
This command assigns program information data to the selected
program.
Information string <cr>
Option: PROGRAM NUMBER [,<nr1>]
Option: MEMORY [,<cr>]– Available are: INTERNAL | RAM | USB
<cr> [,<nr1>] [,<cr>]
PROG:INFO 3, INTERNAL, SAMPLE TEST
PROGram[:SELected]:INFOrmation? [<nr1>,] [,<cr>]
<cr>
PROG:INFO? 2, USB
-> Program info string
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 245 of 485