5.21.6 AFX Power Source to T Option Connections
The required connections between the AFX power source and the transformer option
chassis are shown in Figure 5-30 below.
Note
AC input, AC Load and sense wiring are NOT included with the power source and
must be supplied by the end-user.
AFX Power Source
DB25 Cable
Transformer Option
Figure 5-30: Interconnections between AFX Power Sourec and Transformer Option Chassis
For operating information, refer to Section 6.4.
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
SECTION 5: UNPACKING AND INSTALLATION
TO LOAD
AFX SERIES® OPERATION MANUAL
TO LOAD
Page 103 of 485