Pacific Power Source AFX Series Operation Manual page 329

Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Description
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
[SOURce:]PULSe:PHASe#:MINimum?
This command returns the minimum permissible set value of the
initial PULSE phase angle for selected phase #
<nr1>
PULS:PHAS1:MIN?
0.0000
[SOURce:]PULSe:PHASe#:MAXimum?
This command returns the maximum permissible set value of the
initial PULSE phase angle for selected phase #
<nr1>
PULS:PHAS1:MAX?
360.000
[SOURce:]PULSe:PHASe#:DEF?
This command returns the default set value of the initial PULSE phase
angle for selected phase #
<nr1>
PULS:PHAS2:DEF?
120.0000
PULS:PHAS3:DEF?
240.0000
[SOURce:]PULSe <cr>
>>> Alias for PROGram:TRANsient command. <<<
This command controls pulse transient execution
< RUN | STOP | PAUSe | STEP | RESTart >
<cr>
PULS RUN
[SOURce:]PULSe?
Query format returns the pulse transient execution state as either
RUN, STOP, PAUS, STEP or REST
<nr1>
Return values respresent running state as follows:
0 Stopped
1 Running
2 Paused
3 Stepping
4 Waiting for trigger
PULS?
1
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 329 of 485