Pacific Power Source AFX Series Operation Manual page 207

Programmable power source

Hide thumbs Also See for AFX Series:

Table of Contents

Analog Inputs

Analog inputs allow parameters settings to be controlled using DC input signals. The

parameter to be controller by each of four available analog inputs can be assigned from the

front panel.

Available settings or read-outs and parameter ranges are:

INPUT VOLTAGE

The Command parameter allows the user to assign the selected analog input to the

parameter that will be controlled by it. The list of available setting commands for these

inputs is shown below.

The Gain and Offset parameters can be used to scale and shift the input value to the desired

range for min. and max. output.

Entire Contents Copyright

AFX Series Power Source Operation Manual

[ 1 | 2 | 3 | 4 ]

Displays read back voltage

Select command from dropdown list or OFF for none. See

0.0000 to 10.000 V

Offset value

Analog Input Command Values

Table 7-4: AUX I/O Analog Input assignable Commands

AFX SERIES® OPERATION MANUAL

Rear Panel, Connectors and Protection

Page 207 of 485

Show Quick Links

Table of Contents