Pacific Power Source AFX Series Operation Manual page 228

Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
MEASure:LOGger:RATE
Sets the frequency at which the logging process will take
measurements.
Frequency in Hz. Range is 1 Hz through 10 Hz.
<nr1>
MEAS:LOG:RATE 5
MEASure:LOGger:RATE?
<nr1>
MEAS:LOG:RATE?
5
MEASure:LOGger:TIMEstamp <cr>
Sets the time stamp format that will be attached to every
measurement record in the measurement log file.
< DATE | 0 | TIME | 1 | ALL | 2 >
<cr>
MEAS:LOG:TIME ALL
MEASure:LOGger:TIMEstamp?
<nr1>
MEAS:LOG:TIME?
2
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 228 of 485