Pacific Power Source AFX Series Operation Manual page 322

Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
[SOURce:]PULSe:DCYCle <nr1>, <opt>
This command sets the pulse duty cycle in percent. Minimum set
value allowed is 1, max is 99.
Duty Cycle %, Option: < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
<nr1>, <cr>
PULS:DCYC 50
[SOURce:]PULSe:DCYCle?
<nr1>
PULS:DCYC?
50.0000
[SOURce:]PULSe:DCYCle:MINimum?
This command returns the minimum permissible set value for the
PULSE duty cycle.
<nr2>
PULS:DCYC:MIN?
0.0000
[SOURce:]PULSe:DCYCle:MAXimum?
This command returns the maximum permissible set valuefor the
PULSE duty cycle.
<nr2>
PULS:DCYC:MAX?
100.0000
[SOURce:]PULSe:DCYCle:DEFault?
This command returns the default set value for the PULSE duty cycle.
<nr2>
PULS:DCYC:DEF?
50.0000
[SOURce:]PULSe:PERiod <nr2>, <opt>
This command sets the pulse period in seconds.
Period, Option: < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
<nr2>, <cr>
PULS:PER 12.8
[SOURce:]PULSe:PERiod?
<nr2>
PULS:PER?
12.8000
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 322 of 485