Pacific Power Source AFX Series Operation Manual page 326

Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
[SOURce:]PULSe:VOLTage[:AC]#:MAXimum?
This command returns the maximum permissible set value for the
PULSE voltage for selected phase # or for all phases if phase
reference is omitted
<nr2>
PULS:VOLT:MAX?
300.0000
[SOURce:]PULSe:VOLTage[:AC]#:DEFault?
This command returns the default set value for the PULSE voltage for
selected phase # or for all phases if phase reference is omitted
<nr2>
PULS:VOLT:DEF?
0.000,0.000,0.000
PULE:VOLT1:DEF?
0.000
[SOURce:]PULSe:VOLTage:DC# < nr2 >, <cr>
[SOURce:]PULSe:VOLTage:DC#
Voltage phase A, OPT: Voltage phase B, OPT: Voltage phase C, OPT
This command sets the PULSE DC voltage for selected phase # or for
all phases if phase reference is omitted.
Voltage , < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
<nr2>, <cr>
PULS:VOLT:DC1 270.00
[SOURce:]PULSe:VOLTage:DC#?
<nr2>
PULS:VOLT:DC1?
270.0000
[SOURce:]PULSe:VOLTage:DC#:MINimum?
This command returns the minimum permissible set value for the
initial PULSE DC voltage for selected phase # or for all phases if phase
reference is omitted
<nr2>
PULS:VOLT:DC1:MIN?
-425.0000
[SOURce:]PULSe:VOLTage:DC#:MAXimum?
This command returns the maximum permissible set value for the
initial PULSE DC voltage for selected phase # or for all phases if phase
reference is omitted
<nr2>
PULS:VOLT:DC1:MAX?
425.0000
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 326 of 485