Pacific Power Source AFX Series Operation Manual page 277

Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
[SOURce:]PHASe:SPLIT <b>
This command sets the split phase mirroring mode. This mode allows
non-symmetrical AC arbitrary waveforms to be used when in split
phase mode. Default state is on.
[ 0 | OFF| 1 | ON]
0 = OFF
1 = ON
<b>
PHAS:SPLIT ON
[SOURce:]PHASe:SPLIT?
<b>
PHAS:SPLIT?
1
[SOURce:]UPDATEPHase <nr2>
This command sets the start phase angles at which any voltage or
frequency setting change will take place. It also determines the start
phase angle for phase A for the start of a transient execution.
0.0 to 359.9
<nr2>
UPDATEPH 90.0
[SOURce:]UPDATEPHase?
<nr2>
UPDATEPH?
90.0
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 277 of 485