Pacific Power Source AFX Series Operation Manual page 330

Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Description
Returned Data Format
Query Example
Query Syntax
Description
Parameters
Parameter Format
Description
Returned Data Format
Query Example
Query Syntax
Description
Parameters
Parameter Format
Description
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
[SOURce:]PULSe:LOAD
This command converts the pulse transient definition to the power
source's regular transient segment format and loads it in the
controller real-time memory for execution.
None
n/a
STEP RUN
[SOURce:]PULSe:LOAD?
Query format returns a 1 if the pulse transient load operation was
successful, otherwise returns 0.
<nr1>
Return values respresent:
0 Load Failed
1 Load completed
STEP?
1
[SOURce:]PULSe:PROGress?
>>> Alias for PROGram:TRANsient:PROGress command. <<<
This query command returns the status of the step being executed.
None
n/a
Query returns the step transient execution state as either RUN, STOP,
PAUS, STEP or REST
<cr>
The response is a comma-separated value string representing:
PROGRESS, CURRENT SEGMENT PROGRESS, CURRENT SEGMENT, CURRENT
SEGMENT TIME, TOTAL TIME, TOTAL SEGMENTS, REPEAT TIME COUNTER
PULS:PROG?
1, 45, 2, 1.2300, 2.0000, 4, 5
[SOURce:]PULSe:CHECK?
This query command returns the result of a check on the
programmined pulse parameters to determine if they are ok to run.
None
n/a
Query returns result of PULSE parameters integrity check
<cr>
The response is either OK or if not, a string containing the error.
PULS:PROG?
OK
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 330 of 485