Pacific Power Source AFX Series Operation Manual page 323

Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
[SOURce:]PULSe:PERiod:MINimum?
This command returns the minimum permissible set value for the
PULSE period setting.
<nr2>
PULS:PER:MIN?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
[SOURce:]PULSe:PERiod:MAXimum?
This command returns the maximum permissible set valuefor the
PULSE period.
<nr2>
PULS:PER:MAX?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
[SOURce:]PULSe:PERiod:DEFault?
This command returns the default set value for the PULSE period.
<nr2>
PULS:PER:DEF?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
[SOURce:]PULSe:WIDTh <nr2>, <opt>
This command sets the pulse width in seconds.
Width, Option: < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
<nr2>, <cr>
PULS:WIDT 25.6
[SOURce:]PULSe:WIDTh?
<nr2>
PULS:WIDT?
25.6000
[SOURce:]PULSe:WIDTh:MINimum?
This command returns the minimum permissible set value for the
PULSE width.
<nr2>
PULS:WIDT:MIN?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 323 of 485