Rear Panel, Connectors And Protection; Output Terminals - Pacific Power Source AFX Series Operation Manual

Programmable power source
Hide thumbs Also See for AFX Series:
Table of Contents

Advertisement

7

Rear Panel, Connectors and Protection

This section describes the rear panel layout of the AFX Series® AC power source.

7.1 OUTPUT Terminals

HAZARDOUS OUTPUT: The power source output may be set to hazardous voltage levels. It
provides basic isolation from the AC input mains. Therefore, the output must always be
considered hazardous. Connections must be inaccessible to the operator in all situations when
AC input mains voltage is applied.
Always disconnect power supply from the mains before connecting or disconnecting to the
hazardous output terminals.
SORTIE DANGEREUSE: La sortie de l´appareil peut être réglée à des niveaux de tension dangereux.
L´appareil fournit une isolation de base du réseau d'entrée AC. Par conséquent, la sortie doit
toujours être considérée comme dangereuse. Les connexions doivent être inaccessibles à
l'opérateur dans toutes les situations où la tension d´entrée secteur est appliquée.
Toujours débrancher l'alimentation secteur avant de connecter ou déconnecter les bornes de
sortie dangereuses.
The output terminal block for load connections is located near the center of the rear panel.
Note: Always refer to Section 2.3 "Safety Information" and Section 5.14, "Load Connections" on
page 61.
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
SECTION 7:
WARNING
AVERTISSEMENT
AFX SERIES® OPERATION MANUAL
Rear Panel, Connectors and Protection
Page 185 of 485

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents