Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
[SOURce:]IMPEDance:STATe
This command sets the programmable impedance state to either Off
(0) or On (1).
Note:
To enable the programmable impedance function, the
output of the power source must be turned OFF first. Trying to
enable this function while the output is ON will result in an error
message.
< 0 | 1 >
<b>
IMPED:STAT 1
[SOURce:]IMPEDance:STATe?
<b>
IMPED:STAT?
1
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 300 of 485