Pacific Power Source AFX Series Operation Manual page 271

Query Format
Description
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
[SOURce:]VOLTage:DC#:LIMit:SATuration:MAXimum?
Returns maximum sine wave RMS voltage at which saturation of the
output inverter will occur.
See [SOURce:]VOLTage:DC#:LIMIT:SATuration:RANGe? for details.
<nr2>
VOLT:DC3:LIM:SAT:MAX?
254.946
[SOURce:]VOLTage:DC#:LIMit:SATuration:MINimum?
Returns minimum sine wave RMS voltage at which saturation of the
output inverter will occur.
See [SOURce:]VOLTage:DC#:LIMIT:SATuration:RANGe? for details.
<nr2>
VOLT:DC3:LIM:SAT:MIN?
-254.946
[SOURce:]VOLTage:EXTend
This command grants access to a higher voltage range extension
mode. When enabled, AC voltage settings up to 333V L-N are
supported.
[ 0 | OFF | 1 | 2 ]
0 = Off, 312Vac max.
1 = 320Vac max
2 = 333Vac max
<bool>
VOLT:EXT 1
[SOURce:]VOLTage:EXTend?
<nr1>
VOLT:EXT?
1
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 271 of 485