Table 6-20: Available Unit Configuration 1 Screen Soft Keys - Pacific Power Source AFX Series Operation Manual

Coupling
Access to other utility screens is available from the UNIT CONFIGURATION screen through
the soft keys. The table below lists the available soft keys on the UNIT CONFIGURATION
screen.
SOFT KEY
User Limits (SK1)
Ramp & Slew (SK3)
Program Memory (SK2)
CSC Config. (SK4)
Next Screen (SK5)

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
This field selects the output coupling mode of the power
source. Unless an optional output transformer is installed
with the power source (T Option), this field is always fixed
to DIRECT. Direct coupling output mode supports either AC
mode, DC mode or a combination of AC and DC output to
be programmed. If the optional transformer is installed, the
AFX model number will show "AFXT" to indicate the
presence of the output transformer. To use the output
transformer coupled range, selected XFMR (xxxV) in this
field. The voltage indication may vary based on the
transformer ration of the installed output transformers.
Note: While in XFMR coupled mode, only AC voltage
programming is possible.
Description
Displays SETUP MENU screen. Refer to section 0
Displays SLEW RATE MENU screen. Refer to section 6.7.3
Displays PROGRAM MEMORY screen. Refer to section 6.7.4
Display CSC setting screen
Toggle to alternate UNIT CONFIGURATION screen

Table 6-20: Available UNIT CONFIGURATION 1 screen soft keys

AFX SERIES® OPERATION MANUAL
Front Panel Operation
SECTION 6:
Page 152 of 485