Transformer Options For Cabinet Systems - Pacific Power Source AFX Series Operation Manual

option applies to standard 15U based AFX cabinet models only and substitutes a 28U
cabinet with additional filler panels.

5.17.5 -Transformer Options for Cabinet Systems

Cabinet systems can be ordered with an optional AC only voltage range higher than 300Vac.
Standard transformer coupled range is 400Vac L-N / 692V L-L. Other voltage range may be
available on request.
Cabinet based transformer option systems have three step-up transformers installed at the
bottom of the cabinet. As such, cabinet height may be taller than for the equivalent power
rated AFX cabinet without the transformer option.
All controls and wiring between the AFX power sources and the optional transformers is
installed inside the cabinet and operation is no different from a standard AFX cabinet
system except there is another available AC only voltage range.
Refer to Section 6.4 for details on using the optional voltage range.

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
AFX SERIES® OPERATION MANUAL
SECTION 5: UNPACKING AND INSTALLATION
Page 85 of 485