Pacific Power Source AFX Series Operation Manual page 290

Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
[SOURce:]PEAK:CURRent:LIMit <nr2>
This command set the user programmable peak current protection
limit. (Not available in models with -413 Option).
Peak current
<nr2>
PEAK:CURR:LIM 80.0
[SOURce:]PEAK:CURRent:LIMit?
<nr2>
PEAK:CURR?
80.0000
[SOURce:]PEAK:CURRent:LIMit:MAXIMUM?
This query command returns the maximum allowable setting for the
user programmable peak current protection limit. (Not available in
models with -413 Option).
<nr2>
PEAK:CURR:LIM:MAX?
104.0000
[SOURce:]PEAK:CURRent:LIMit:MINIMUM?
This query command returns the minimum allowable setting for the
user programmable peak current protection limit. (Not available in
models with -413 Option).
<nr2>
PEAK:CURR:LIM:MIN?
0.0000
[SOURce:]PEAK:CURRent:LIMit:DEFault?
This query command returns the default setting for the user
programmable peak current protection limit. (Not available in models
with -413 Option).
<nr2>
PEAK:CURR:LIM:DEF?
104.0000
[SOURce:]PROTect:PEAK:CURRent[:STATe] <ON|OFF>
This command enables or disables the peak current protection
function.
< ON | 1 | OFF | 0 >
<cr> | <b>
PROT:PEAK:CURR ON
[SOURce:]PROTect:PEAK:CURRent[:STATe]?
<b>
PROT:PEAK:CURR?
1
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 290 of 485