Pacific Power Source AFX Series Operation Manual page 355

Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
SYSTem:COMMunicate:SERial:PARity
This command sets the parity for the serial port.
< 0 | NONE | 1 | OFF | 2| EVEN >
<nr1>
SYST:COMM:SERial:PAR NONE
SYSTem:COMMunicate:SERial:PARity?
<nr1>
SYST:COMM:SER:PAR?
0
SYSTem:COMMunicate:SERial:BITS
This command sets the number of data bits used for serial
communications. Available settings are 7 or 8
< 7 | 8 >
<nr1>
SYST:COMM:SER:BITS 8
SYSTem:COMMunicate:SERial:BITS?
<nr1>
SYST:COMM:SER:BITS?
8
SYSTem:COMMunicate:SERial:SBITs
This command sets the number of stop bits used for serial
communications. Available settings are 1 or 2.
< 1 | 2 >
<nr1>
SYST:COMM:SER:SBIT 2
SYSTem:COMMunicate:SERial:SBITs?
<nr1>
SYST:COMM:SER:SBIT?
2
AFX SERIES® OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 355 of 485