Configuring System Settings; Configuring Network Settings; Ipv4 And Ipv6 Network Settings - Yealink VC880 Administrator's Manual

and the branch offices can use the cloud deployment method. Besides, both the inbound and the outbound calls are
available.

Configuring System Settings

This chapter provides information for configuring system settings, such as the account, the network, the audio, and
the video.
•

Configuring Network Settings

• Configuring Account Settings
Configuring the Video Conference Platform
•
• Configuring General Settings
• Configuring the Audio Settings
• Configuring Video Settings
• Configuring Content Sharing
• Configuring Camera Settings
Call Settings
•
Configuring the Conference Room
•
• Configuring the Security Features
• Managing the Directory
• Managing the Call Log
• Placing a Call
Configuring Network Settings
The following introduces how to configure network settings.
•

IPv4 and IPv6 Network Settings

• DHCP Options
• VLAN
Wi-Fi
•
Wireless Access Point
•
• 802.1x Authentication
• Network Speed and Duplex Mode
• Restricting Reserved Ports
• Quality of Service (QoS)
Adjusting MTU of Data Packets
•
IPv4 and IPv6 Network Settings
Yealink video conferencing system support IPv4 addressing mode, IPv6 addressing mode, as well as the IPv4&IPv6
dual stack-addressing mode.
Note:
Yealink video conferencing systems comply with the DHCPv4 specifications documented in
the DHCPv6 specifications documented in
IP Addressing Mode Configuration
•
Configuring IPv4
•
• Configuring IPv6
RFC 3315.
| Configuring System Settings | 43
RFC 2131, and