Led Indicator; Network Settings - Yealink RoomCast User Manual

Parameter
Display IP Address
Display Wi-Fi Name
Display Wi-Fi Password
Display Time
Display Brand Logo
Related information
Home Screen

LED Indicator

You can enable or disable the LED indicator of RoomCast.
Procedure
1. On the web user interface, go to Basic > LED Control.
2. Enable or disable the LED Indicator.
Status Description
Red In idle mode
Green Working
Off Power off

Network Settings

This section introduces: how to connect the RoomCast to a wireless network and use RoomCast to provide
a Wi-Fi Hotspot.
Description
Enable or disable the home screen to display the RoomCast IP
address.
Default: enabled.
Enable or disable the home screen to display the RoomCast Wi-Fi
name.
Default: enabled.
Enable or disable the home screen to display the RoomCast Wi-Fi
password.
Default: enabled. This parameter is available only when you enable the
Display Wi-Fi Name.
Enable or disable the home screen to display the time.
Default: enabled.
Enable or disable the home screen to display the brand logo.
Default: enabled. You can upload your brand logo. Supported file
format are png, jpg, or jpeg. The file size should be no more than 5MB.
| Configurations on the Web | 9