Controlling the Participant Cameras
The moderator can control the participant cameras, including moving up and down, moving left and right,
and zooming in/out. The participant can control only the moderator cameras except for other participant
cameras.
Before you begin
Make sure that the participant camera to be controlled is turned on and the Far Control Near Camera
feature is enabled.
Procedure
1. In the Conference Control page, tap Participant.
2.
Tap
after the desired participant and select Camera Control.
3. Tap the navigation keys to adjust the camera angle.
4.
Tap
or
to adjust the focal length.
Removing Participants
Procedure
1. In the Conference Control page, tap Participant.
All participants are displayed on the touch screen.
2. Tap
beside the participant.
It prompts whether or not you are sure to remove the participant.
3. Confirm the action.
Ending the Local Video Conference
Only the moderator can end the conference, and after the conference is ended, all the participants leave
the conference.
Procedure
1. In the Conference Control page, tap Hand Up.
It prompts whether or not you want to end all calls.
2. Tap Confirm.
Switching Platform Quickly
If the account logged in the system is not the desired one, you can quickly switch to the corresponding
account.
About this task
The account types you can switch on CTP20 are Yealink Cloud account, YMS account, Zoom account, and
BlueJeans account.
If the administrator does not enable the quickly switch platform feature, contact your administrator.
| Switching Platform Quickly | 19