2. Enter the administrator password (default: sfb) to access the Setup screen.
3. Navigate to Windows Settings.
4. Select Administrator from the bottom-left corner.
5. Enter the administrator password (default: sfb) and then sign in.
Logging into Yealink Management Cloud Service/Yealink
Device Management Platform
The Yealink RoomConnect plugin running under Windows automatically detect all devices in the MVC Ⅱ
system. After logging to the Yealink Management Cloud Service or Yealink Device Management Platform
via Yealink RoomConnect, you can manage all devices in the MVC Ⅱ system, including the unified
upgrade, as well as diagnosis and alarm.
About this task
Note: For more information on how to manage the devices on Yealink Management Cloud Service/
Yealink Device Management Platform, please refer to
Administrator Guide/Yealink Device Management Platform Administrator
Procedure
1. Sign in your system as an administrator.
2. Run the Yealink RoomConnect plugin.
3. Tap
on the home page.
4. Select a desired platform to connect.
5. Depend on your choice:
If you select Yealink Management Cloud Service, enter the enterprise ID.
•
The enterprise ID can be obtained from the Account Settings on your Yealink Management Cloud
Service.
•
If you select Yealink Device Management Platform, enter the server address.
| Logging into Yealink Management Cloud Service/Yealink Device Management Platform | 36
Yealink Management Cloud Service for Enterprise
Guide.