Procedure
1. Click the
button, and then go to
2. Select the ZoomRooms account from the bottom-left corner and then enter the password (default:
zoom123) to enter the Zoom Rooms app.
Logging into Yealink Management Cloud Service/Yealink
Device Management Platform
The Yealink RoomConnect plugin running under Windows automatically detect all devices in the Zoomm
Rooms system. After logging to the Yealink Management Cloud Service or Yealink Device Management
Platform via Yealink RoomConnect, you can manage all devices in the Zoom Rooms system, including the
centralized upgrade, as well as diagnosis and alarm.
Procedure
1. Sign in your system as an administrator.
2. Run the Yealink RoomConnect plugin.
3. Tap
on the home page.
4. Select a desired platform to connect.
5. Depend on your choice:
•
If you select Yealink Management Cloud Service, enter the enterprise ID.
The enterprise ID can be obtained from the Account Settings on your Yealink Management Cloud
Service.
•
If you select Yealink Device Management Platform, enter the server address.
6. Enter your meeting room.
7. Select the desired device model.
8. Tap Confirm.
The system will connect to the Yealink Management Cloud Service/Yealink Device Management
Platform.
Related tasks
ZoomRoomsAdmin Sign-in
Troubleshooting
This section describes solutions to common issues that may occur while using the Yealink CP960-UVC
Zoom Rooms kit. Upon encountering a case not listed in this section, contact your Yealink reseller for
further support.
Upgrading System Software
•
Upgrading the CP960
•
Firmware for Each Device
•
Checking Whether the Phone Can Access to the External Network
•
General Issues
•
| Logging into Yealink Management Cloud Service/Yealink Device Management Platform | 36
> Sign out .