Rep 1.25 Paper Drive Roll - Xerox Phaser 3052 Service Manual

REP 1.25 Paper Drive Roll

Parts List on PL 4.5
Removal
1. Switch Off the Printer and unplug the Power Cord.
2. Remove the Top Cover (REP 1.3).
3. Disconnect connector CN6 from the HVPS PWB, and route the wires through the frame
(Figure 1).
CN6
Figure 1 HVPS CN6
Xerox® Phaser® 3052/3260 Service Manual
4. Remove the Main Drive Unit (5 screws) and move the Fuser Drive Locking Lever to the
Unlock position (Right) (Figure
June 2014
4-35
2).
Screws
Locking Lever
Figure 2 Main Drive Unit
Repairs
REP 1.25