Rep 10.15 T/A Roll 4/5/ T/A Roll 3 - Xerox Phaser 7500 Service Manual

Hide thumbs Also See for Phaser 7500:

Table of Contents

REP 10.15 T/A Roll 4/5/ T/A Roll 3

PL10.11.13/ PL10.11.16

Phaser 7500 Printer Service Manual

1. Remove 2 screws (silver, 8mm) that secure the Chute to the Tray Module (3T)

and remove the Chute.

2. Remove the KL Clip that secures the T/A Roll to the Tray Module (3T).

Be careful not to drop the Sleeve Bearing when performing the following step.

3. Slide the T/A Roll to the rear to remove the front Sleeve Bearing from the hole,

and then tilt the front side of the T/A Roll towards you to remove the T/A Roll.

Take Away Roller 3

Service Parts Disassembly