REP 1.3 Option Cover
Parts List on
PL 1.1
Removal
Switch off the power and disconnect the Power Cord.
1.
Squeeze the cover release and open the Rear Cover Assembly.
2.
Push the two locking tabs at the rear of Option Cover
3.
Lift and slide the Option Cover to the rear and remove
Figure 1 Option Cover
Replacement
1.
Reinstall the components in the reverse order.
Repair-Adjustment
REP 1.3, REP 1.4
WARNING
(Figure
1).
(Figure
1).
REP 1.4 Top Cover Assembly
Parts List on
PL 1.1
Removal
Switch off the power and disconnect the Power Cord.
1.
Remove Tray 1.
2.
Remove the Front Cover Assembly
3.
Remove the Left Front Cover
4.
Open the Rear Cover Assembly.
5.
Remove the four screws securing the Top Cover Assembly
6.
Raising the Top Cover Assembly, disconnect P/J412 connector on the back side of the
Control Panel Assembly
(Figure
7.
Remove the Top Cover Assembly
Figure 1 Top Cover Assembly
Replacement
1.
Reinstall the components in the reverse order.
02/2000
4-6
WARNING
(REP
1.6).
(REP
1.7).
(Figure
1).
1).
(Figure
1).
Initial Issue
DocuPrint N2125