REP 1.3 Top Cover Assembly
Parts List on PL 1.1
Removal
Switch off the power and disconnect the Power Cord.
1.
Open the Rear Cover.
2.
Remove the OCT, if installed (REP 10.1).
3.
Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect it from
light.
NOTE: Place paper inside the Print Cartridge cavity to catch any dropped hardware.
4.
Remove the Left Side Cover (REP 1.1).
5.
Remove the 8 screws that secure the Top Cover Assembly to the printer (Figure 1).
6.
Remove the two screws that secure the Right and Left Print Cartridge Latches to the Top
Cover (Figure 1).
7.
Disconnect P/J421 from the rear of the Control Panel (Figure 1).
8.
Remove the Top Cover Assembly (Figure 1).
Repair-Adjustment
REP 1.3
WARNING
Figure 1 Top Cover Assembly
Replacement
1.
Reinstall the components in the reverse order.
NOTE: Carefully reinstall the Top Cover Assembly on the overlapped sections of the Right
Side Cover and the Front Cover.
02/2000
4-6
Initial Issue
DocuPrint N2025/N2825