Rep 3.12 525-Sheet Feeder - Xerox ColorQube 8570 Service Manual

Replacement
For the Pick Roller, insert the replacement Roller with the metal shaft at the top and toward the
left. The Grey Rollers should be facing you. Position the Roller back about 2 inches (5 cm) in
the tray cavity. Feel for a large plastic lip on the right and the mating gear on the left. Rotate the
Pick Roller up and back to snap it into place.
Figure 4 Replacing the Pick Roller
Repairs and Adjustments
REP 3.10, REP 3.12

REP 3.12 525-Sheet Feeder

Parts List on PL 3.1 Item 12
Removal
Parts of the printer are hot. To avoid personal injury or damage to the printer, allow the
ink to solidify. Run the shutdown procedure to park the Printhead and begin cooling the
printer. Wait at least 30 minutes for the printer to cool before moving or packing the
printer.
Two people are required to move the printer from the Optional 525-Sheet Feeder. Use
safety lifting and handling techniques when moving the printer.
1. Carefully lift the printer away from the 525-Sheet Feeder.
Figure 1 Removing the 525-Sheet Feeder
October 2012
4-62
WARNING
WARNING
Revised, 3rd Revision - Xerox Internal Use Only
ColorQube 8570/8870 Service Manual