Table of Contents
Advertisement
Chapter 7: System maintenance
This chapter contains information to help you perform system maintenance, such as replacing DECT
Access Points (DAP) and managing DAP synchronization.
Navigation
•
DAP Web interface
•
C4710 DAP LED indications
•
Remove and replace a DAP (if a new DAP is available)
•
Remove and replace a DAP (if a new DAP is not available)
•
System synchronization analysis
•
Export and import SIP DECT system
•
DAP Controller deactivation
•
Uninstalling DAP Controller software
•
DAP Controller software update
•
Troubleshooting
•
If you have problems
DAP Web interface
DAPs provide a Web interface. You can use the Web interface to view DAP data, and export
the DAP data to a file. However, you cannot change or modify the data using the Web
interface.
View DAP configuration information using the Web interface.
Viewing DAP configuration information
1. In an Internet browser, enter the DAP IP address in the address field; for example:
SIP DECT Fundamentals
on page 147
on page 169
on page 171
192.168.32.108. The General Settings page appears.
on page 149
on page 153
on page 165
on page 166
on page 167
on page 168
on page 151
on page 152
October 2012
147
Advertisement
Table of Contents
