Show Ipv6 Ospf - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ipv6 ospf

show ipv6 ospf [PROCESS-ID]
Syntax Description
PROCESS-ID
Default
Command Mode
Usage Guideline
Example
Switch > enable
Switch # show ipv6 ospf
CLI Reference Guide
To display general information about OSPF routing processes, use the show
ipv6 ospf command.
(Optional) Internally used identification parameter for an IPv6 OSPF routing
process. It is locally assigned and can be any positive integer. A unique value is
assigned for each IPv6 OSPF routing process.
If the PROCESS-ID is not specified, display all IPv6 OSPF processes.
Default PROCESS-ID: null
User EXEC
The information displayed by the show ipv6 ospf command is useful in
debugging OSPF routing operations.
The following is sample output from the show ipv6 ospf command.
The output after executing this command is as follows on the next page.
show ipv6 ospf
690