Seat Riser; Passenger Seat; Mounting Brackets; Bench Seats - Chevrolet CHEVY VAN G10 SERIES Service Manual

Fig. 3 5 —Passengers Seat

Seat Riser

Removal
1. Remove seat and adjusters as an assembly by remov­
ing bolts securing seat to riser.
2. Remove bolts securing seat riser to floor.
Installation
1
. Install seat riser to floor. T orque bolts to specifica­
tions.
2. Install seat and torque bolts to specifications.
Fig. 3 6 —Bench Seat 2nd or 3rd Position
Passenger Seat (Fig. 35).

Mounting Brackets

Removal
1. Remove seat and brackets from seat riser.
2. Remove brackets from seat.
Installation
1. Install brackets to seat. T orque to specifications.
2. Install seat to seat riser. T orque to specifications.
Seat Riser
Removal
1. Rem ove seat and m ounting bracket as an assembly.
2. Remove riser from floor.
Installation
1. Install riser to floor. T orque bolts to specifications.
2. Install seat to riser. T orque bolts to specifications.
Bench Seats (Fig. 36 and Fig. 37)
Seat and/or Seat Support
Removal
1. Remove bolts securing seat legs to floor.
2. Remove seat assembly.
N O T E : A fte r removing the rear seat, reinstall the
bolts into the anchor nuts to seal the openings from
d irt and foreign m atter.
3. Remove legs and su p p o rt assembly.
Fig. 3 7 —Bench Seat 4th Position
BODY 1B-17
C H E V Y V A N SH O P M A N U A L