Subaru Legacy 2002 Service Manual page 3024

FRONT DOOR LATCH ASSEMBLY
Security and Locks
6. Front Door Latch Assembly
S909334
A: REMOVAL
S909334A18
1) Disconnect ground cable from battery.
2) Remove the front door trim. <Ref. to EI-30,
REMOVAL, Front Door Trim.>
3) Remove the sealing cover. <Ref. to EB-14,
REMOVAL, Front Sealing Cover.>
4) Remove the front inner remote. <Ref. to SL-19,
REMOVAL, Front Inner Remote.>
5) Remove the front door glass. <Ref. to GW-13,
REMOVAL, Front Door Glass.>
6) Remove three nuts, and detach the front door
sash (Rear).
7) Remove the three screws and bolt.
B5M0997
8) Disconnect the connector. Remove the front
door latch assembly.
B: INSTALLATION
S909334A11
Install in the reverse order of removal.
NOTE:
Make sure the lock works properly after installa-
tion.
C: INSPECTION
S909334A10
1) Make sure the rod is not deformed.
2) Make sure the lever and rod work smoothly.
SL-21