Fender Panel - Subaru Legacy 2002 Service Manual

FENDER PANEL

Exterior Body Panels
3. Fender Panel
S913368
A: REMOVAL
S913368A18
1) Disconnect ground cable from battery.
2) Remove side sill spoilers. <Ref. to EI-29,
REMOVAL, Side Sill Spoiler.> (If fitted)
3) Remove side protectors and fender protectors.
(OUTBACK)
4) Remove front bumper face. <Ref. to EI-14,
REMOVAL, Front Bumper.>
5) Remove headlights. <Ref. to LI-13, REMOVAL,
Headlight Assembly.>
6) Remove mud guard. <Ref. to EI-23,
REMOVAL, Mud Guard.>
7) Remove bolts and clips to remove front fender.
B5M0760
B: INSTALLATION
S913368A11
1) Install in the reverse order of removal.
2) When fender panel is installed, clearance
between fender panel and hood or front fender
must be equal.
Tightening torque:
7.35 N·m (0.75 kgf-m, 5.4 ft-lb)
EB-11