Subaru Legacy 2002 Service Manual page 3129

Hide thumbs Also See for Legacy 2002:

Table of Contents

REAR GATE PANEL

Exterior Body Panels

S913363A0701

1) Cover with a vinyl case before drilling holes.

Prevent the vinyl case from being caught by

drill cutting edge

2) Lift body side slightly with piston rods fully

extended, and secure body side on vise stand.

Drill a hole in 2 to 3 mm (0.08 to 0.12 in) diameter

at a point 10 to 200 mm (0.39 to 7.87 in) from door

side, and bleed gas stay completely.

Gas is colorless, odorless, and harmless.

However, gas pressure may spray cutting pow-

der or oil. Be sure to wear dust-resistant

Chapters

Table of Contents